CarPro CQuartz UK 3.0 Ceramic Coating Kit with Reload 30ml

Improved Formula for Easier Application

The new and improved CQuartz UK 3.0 ceramic coating makes it easy to apply on vehicles in all climates – hot, cold, humid, or dry.

Rivaling professional grade products, CQuartz UK has been embraced by fans all across the world. CQuartz UK is renowned for being the strongest coating on the open market. In REAL WORLD side-by-side, apples-to-apples stress tests, CarPro found CQuartz outlasts competing coating products. Now CarPro has improved CQuartz UK even further with this user-friendly evolution.

Benefits of CQuartz Ceramic Coating

CQuartz UK 3.0 offers incredible resistance to chemicals, salt, and environmental damage as well as provide excellent UV protection. The high silica-quartz content creates a hard glassy layer across painted or gel-coat surfaces. CQuartz UK adds incredible levels of depth to the paint along with unbelievable water and dirt repellency and a rugged durability measured in years!

Kit Includes:

• (1) 30ml bottle of CQuartz UK 3.0 (Use 15ml /- per coat for an average size car)
• (1) 100ml bottle of CarPro Reload Silica Spray
• (1) 16" Microfiber Suede Towel
• (1) CarPro Foam Applicator Block
• (5) 4-inch Microfiber Suede Applicators

Features:

• Now easy-to-use in a wide range of temperatures!
• Protection and gloss superior to that of competitor "professional coatings" but easy to use for all detailers
• Extremely high Sio2 quartz content
• Deep gloss that lasts!
• Easy maintenance with "self cleaning" properties (stays cleaner than other products on the market)
• Resistance to wash induced marring, bird dropping damage, stains, high or low temperatures, and traffic film
• Repels UV rays, water, oils, dirt, and contaminants

Specifications:

• Durability: 2 years or more
• Average Thickness: 1~2 Micron per coat
• Coverage 15ml per coat /-
• Water contact angle: 110°
• Minor filling
• Recommended working temperatures: 40F to 100F

Recommended Surfaces:

• Paint
• Metal
• Plastic

Before Application:

• For best results, have all surfaces 100% clean and polished to a high level.
• Before polishing, decontaminate the vehicle with Iron X iron remover, Tar X tar remover, and detailing clay.
• Use (panel prep cleanser) to remove all oils and residue from the surface before applying the coating. This is important because residue left on the paint will compromise the durability of CQuartz.

Directions:

1. Use only with good ambient lighting. You need to see when CQuartz flashes / dries on the surface.
2. Shake CQuartz UK well.
3. Wrap a 4" suede microfiber around the grey side of the included foam applicator block.
4. Slowly open bottle and drag one line of product across applicator.
   
5. Spread across paint in a criss-cross pattern. Try covering an area of two square feet at a time. Attempting larger areas creates a risk of missing spots with imperfect coverage.
6. Buff off as soon as the CQuartz flashes (within 1-5 minutes depending) using a CarPro No-Lint Ultra Towel.
7. Be sure to remove all excess residue before moving to the next section.
8. Switch out the suede microfiber applicators regularly.
9. 30-60 minutes after application is the recommended window to apply CarPro Reload. Wait until next day for Reload if you miss the window.

After Application:

• Keep surface dry for at least one hour after application (for best results keep dry 24 hours).
• Gently wipe any water off the surface during the first 24 hours.
• Avoid detergents and chemicals for 5 days after application.
• If it is dry and the air is clean outside then you may park the vehicle in direct sunlight after application to speed the curing.

Precautions:

• Do not apply in direct sun or on hot surface
• Do not re-use suede applicators
• Do not re-use the towels you used to buff off with on paint
• Wear hand protection
• Wear respiratory protection such as painters mask

CarPro Eraser 500mL

• Pre-coating cleanser
• Completely removes polishing oils prior to the application of CQuartz ceramic coating (or any coating, wax, or sealant).
• Makes an excellent streak free glass cleaner.
• Works as a general purpose degreaser and cleaner

The Rag Company Pearl Puck Applicator 4 Pack

The Pearl Puck feature TRC's Pearl Microfiber Weave outer construction combined with Autofiber's signature plastic barrier and dense foam core. The result is a comfortable applicator that prevents excess coating from seeping into the core, and a smooth ceramic coating application experience. 

The Rag Company Edgeless Pearl Coating Grey

The Pearl is an outstanding towel for the removal and leveling of All Types of Ceramic Coatings.  It's unique closed-loop pearl-weave construction has all the characteristics you need for safe, fast and effective work on coatings - lint-free, soft, removal "bite", and affordability with solid quality.  The use of ceramic coatings is one of the fastest growing areas of automotive detailing and finding a towel that works well with all the various coatings offered has been highly requested. 

Note: TCCA and FAA regulations prohibit this product from being shipped via DHL, UPS, Canada Post or FedEx express air freight services. This item can only be shipped with Canada Post, UPS, or FedEx ground freight options to destinations in Canada and the continental USA.